6061 Aluminum Socket Weld Flange

Aluminum 6061 socket weld flange

• Brand: HANMAC Aluminum 6061 socket weld flange
• Packaging: Plywood cases or pallets or as...
• Supply Ability: 500 ton / month
• Min. Order: 1 Piece/Pieces

When using the aluminum 1060 socket flange, the connection with the pipe is done with 1 fillet weld, at the outside of the Aluminum B241 Socket Weld Flange. But before welding, a space must be created between aluminum 6061 socket weld flange or fitting and pipe. Aluminum 6061 socket weld flange Production Details...

Contact Now

2 inch aluminum 6061 weld neck pipe flange

• Brand: HANMAC 2 inch aluminum 6061 weld neck pipe flange
• Packaging: Plywood cases or pallets or as...
• Supply Ability: 500 ton / month
• Min. Order: 1 Piece/Pieces

Aluminum weld neck Flange(WN flange) seems like a flange has a neck for weld with the pipe. The aluminum 1060 welding neck flange is easily to recognize by their neck. The aluminum 6061 wn flange is connected with the pipe from the neck in butt welding method, that means the neck should be have same material and same...

Contact Now

Aluminum 6061 blind flange RF

• Brand: HANMAC Aluminum 6061 blind flange RF
• Packaging: Plywood cases or pallets or as...
• Supply Ability: 500 ton / month
• Min. Order: 1 Piece/Pieces

Aluminum Blind Flange - A aluminum alloy blind flange is round plate which has all of the relevant boltholes but no centre hole, and because of this feature this aluminum 1060 blind flange is used to close off the ends of a piping systems and pressure vessel openings. Aluminum 6061 blind flange also permits easy...

Contact Now

Alloy steel aluminum flange

• Brand: HANMAC alloy steel aluminum flange
• Packaging: Plywood cases or pallets or as...
• Supply Ability: 60000 ton/year
• Min. Order: 1 Piece/Pieces

Aluminum alloy flanges introduction Aluminum alloy flanges are made from aluminum alloys that have been machined and forged. Due to the different alloying elements added to the aluminum alloy, alloy steel aluminum flange is divided into aluminum-silicon alloy aluminum alloy flange, aluminum-copper-based aluminum alloy...

Contact Now

Alloy steel aluminum weld neck flange

• Brand: HANMAC alloy steel aluminum weld neck flange
• Packaging: Plywood cases or pallets or as...
• Supply Ability: 60000 ton/year
• Min. Order: 1 Piece/Pieces

The obvious differences between aluminum flanges and iron flanges are: From the material: The materials of the two are completely different. One is aluminum and the other is iron, although it is inevitable that some alloying will be carried out during the production process. Distinguish from the details: 1.The same...

Contact Now

Aluminum welding neck flange

• Brand: HANMAC aluminum welding neck flange
• Packaging: Plywood cases or pallets or as...
• Supply Ability: 500 ton / month
• Min. Order: 1 Piece/Pieces

HEBEI HANMAC MACHINE CO., LTD is mainly engaged in aluminum pipe fittings and aluminum flange, with advanced equipment. The company is located in Yanshan, the capital of China's elbow. The company has advanced production equipment, strong technical force and strict testing equipment. It ranks among the best in the...

Contact Now

Aluminum forged blind flange

• Brand: HANMAC aluminum forged blind flange
• Packaging: Plywood cases or pallets or as...
• Supply Ability: 500 ton / month
• Min. Order: 1 Piece/Pieces

HANMAC could produces all kinds of aluminum blind flange. The aluminum 1060 blind flange is exported to more than 60 countries and regions such as USA, Canada, Mexico, Peru, Saudi Arabia, UAE, Kuwait, Iran, Korea, Vietnam, Philippines, Singapore, UK, France and Germany. The aluminum 5083 flange is widely used in...

Contact Now

Aluminum forged slip on flange

• Brand: HANMAC aluminum forged slip on flange
• Packaging: Plywood cases or pallets or as...
• Supply Ability: 500 ton / month
• Min. Order: 1 Piece/Pieces

The aluminum forged slip on flange is made of material aluminum alloy. The aluminum and aluminum alloy state codes can be basically classified into the following five types: F free processing state, O annealing state, H work hardening state, W solution heat treatment state, and T heat treatment state. All the aluminum...

Contact Now

Aluminum alloy forged threaded flange

• Brand: HANMAC aluminum threaded flange
• Packaging: Plywood cases or pallets or as...
• Supply Ability: 500 ton / month
• Min. Order: 1 Piece/Pieces

T code is the aluminum threaded flange common material state. T is means the aluminum 1060 threaded flange applicable to heat treatment, when the aluminum 5083 flange after work hardening. The aluminum 6061 threaded flange achieve a stable product. T code of aluminum forged threaded flange must be followed by one or...

Contact Now

Aluminum alloy forged plate flange

• Brand: HANMAC aluminum forged plate flange
• Packaging: Plywood cases or pallets or as...
• Supply Ability: 500 ton / month
• Min. Order: 1 Piece/Pieces

Precautions for post-weld cleaning of aluminum pipe fittings such as aluminum elbows and aluminum forged plate flange: First, carefully clean the welded joint of the aluminum 1060 plate flange with a hard brush in hot water. Next, the weldment is dipped in a chromic anhydride aqueous solution or a potassium dichromate...

Contact Now

Aluminum socket weld flange

• Brand: HANMAC Aluminum socket weld flange
• Packaging: Plywood cases or pallets or as...
• Supply Ability: 500 ton / month
• Min. Order: 1 Piece/Pieces

The mainly aluminum socket flange we could offered are aluminum 1060 socket weld flange, aluminum 5083 socket weld flange, aluminum 6061 socket weld flange, aluminum B241 socket weld flange, aluminum 6061T6 socket weld flange. If you need other material, pls tell me. We will try our best to satisfy you. Production...

Contact Now

2 inch aluminum 150 class pipe flange

• Brand: HANMAC 2 inch aluminum 150 class pipe flange
• Packaging: Plywood cases or pallets or as...
• Supply Ability: 500 ton / month
• Min. Order: 1 Piece/Pieces

The aluminum 1060 flange has many sizes. For our products aluminum forged flange, the size of it is from 1/2 inch to 24 inch. The normal size of aluminum socket weld flange are usually using as DN and inch, same with other aluminum flange, such as aluminum weld neck flange, aluminum blind flange and so on. 2 inch...

Contact Now