Communicate with Supplier? Supplier
Leon Mr. Leon
What can I do for you?
Contact Supplier

HEBEI HANMAC MACHINE CO., LTD.

Aluminum 1060 Cap - manufacturer, factory, supplier from China

(Total 24 Products for Aluminum 1060 Cap)

  • 6060T6 aluminum alloy elbow

    6060T6 aluminum alloy elbow

    • Brand: HANMAC

    • Packaging: Plywood cases or pallets or as customer's require

    • Supply Ability: 500 ton/month

    • Min. Order: 1 Piece/Pieces

    Product introduction of aluminum elbow alumimum elbows or known as aluminum std elbow is used to change the direction of the pipeline and connect two of the same or different nominal diameter pipe It is pushing by hot pushing machine The 6061T6 aluminum elbow is the main material in aluminum alloy elbow Compareing...

    Contact Now

  • Aluminum alloy ASTM B241 6061T6 short radius elbow

    Aluminum alloy ASTM B241 6061T6 short radius elbow

    • Brand: HANMAC aluminum 6061T elbow

    • Packaging: Plywood cases or pallets

    • Supply Ability: 60000 ton/year

    • Min. Order: 1 Piece/Pieces

    6061T6 Aluminum elbow product price difference with others A friend who specializes in purchasing aluminum pipe fittings may have a deep understanding when inquiring about aluminum elbow manufacturers It will be fond that there is a big difference price in the same products Why is this reason First of all the raw...

    Contact Now

  • 3 inch STD long radius aluminum 90D elbow

    3 inch STD long radius aluminum 90D elbow

    • Brand: HANMAC long radius 90D elbow

    • Packaging: Plywood cases or pallets

    • Supply Ability: 60000 ton/year

    • Min. Order: 1 Piece/Pieces

    Matters needing attention in the installation of 90Degree SR LR aluminum elbow Before installing the aluminum long radius elbow it is necessary to verify whether the passage meets the standard requirements of the aluminum elbow interface for engineering clean the surface dirt and classify the packaging to avoid...

    Contact Now

  • Aluminum alloy unequal tee

    Aluminum alloy unequal tee

    • Brand: aluminum alloy unequal tee

    • Packaging: Plywood cases or pallets

    • Supply Ability: 60000 ton/year

    • Min. Order: 1 Piece/Pieces

    HEBEI HANMAC MACHINE CO LTD is the manufacture for producing the aluminum tee fitting which is located in Yanshan County Cangzhou City It is near Beijing Tianjin and Huanghua So the aluminum reducing tee is very convenient to delivery One of the aluminum alloy fittings is aluminum tee It included in aluminum equal tee...

    Contact Now

  • 3 inch aluminum ANSI B16.9 STD tee

    3 inch aluminum ANSI B16.9 STD tee

    • Brand: HANMAC 3 inch aluminum ANSI B16.9 STD tee

    • Packaging: Plywood cases or pallets

    • Supply Ability: 60000 ton/year

    • Min. Order: 1 Piece/Pieces

    The delivery of aluminum tee Most aluminum tee fitting for international cargo are transported by shipping and a small part of them are transported by rail or road Some aluminum STD tees are also transported by pipeline or postal With the development of the aviation industry the volume of cargo transported by air has...

    Contact Now

  • Alloy steel aluminum cap

    Alloy steel aluminum cap

    • Brand: HANMAC Alloy steel aluminum cap

    • Packaging: Plywood cases or pallets or as customer's requirement.

    • Supply Ability: 60000 ton/year

    • Min. Order: 1 Piece/Pieces

    Introduction about the Alloy steel aluminum cap The alloy steel aluminum cap also known as the dish head the cap the bulkhead The aluminum steel cap is welded on the pipe end or on the external thread of the pipe The alloy steel cap is used to close the pipeline and function the same as the pipe plug Our mainly...

    Contact Now

  • Aluminum alloy 1060 cap

    Aluminum alloy 1060 cap

    • Brand: HANMAC Aluminum alloy 1060 cap

    • Packaging: Plywood cases or pallets or as customer's requirement.

    • Supply Ability: 60000 ton/year

    • Min. Order: 1 Piece/Pieces

    Application of aluminum alloy 1060 cap Due to the industrial production environment aluminum alloy 1060 cap are used in most cases The aluminum 1060 cap is usually located at both ends of the pressure vessel and 1060 cap is one of the main pressure bearing components of the pressure vessel The sealing of the 1060...

    Contact Now

  • Aluminum alloy 5083 cap

    Aluminum alloy 5083 cap

    • Brand: HANMAC Aluminum alloy 5083 cap

    • Packaging: Plywood cases or pallets or as customer's requirement.

    • Supply Ability: 60000 ton/year

    • Min. Order: 1 Piece/Pieces

    Aluminum alloy 5083 cap usage Because pressure vessels are mostly used in industrial chemical reactions their ports must be resistant to deformation and corrosion The materials used are carbon steel stainless steel aluminum copper etc especially aluminum alloy So the aluminum alloy cap is usually used in the industry...

    Contact Now

  • Alloy aluminum seamless 6061T6 3 inch cap

    Alloy aluminum seamless 6061T6 3 inch cap

    • Brand: HANMAC Alloy steel aluminum cap

    • Packaging: Plywood cases or pallets or as customer's requirement.

    • Supply Ability: 60000 ton/year

    • Min. Order: 1 Piece/Pieces

    The characteristics of the use of the alloy aluminum seamless 6061T6 3 inch cap 1 If the pipe has reached the top and is not ready to be extended It can be welded to the pipe with the aluminum 3 inch cap and used as the end of the pipe 2 Use in a pressurized container There is a straight tube in the middle of the...

    Contact Now

  • ANSI B16.9 1060 aluminum SCH 40 cap

    ANSI B16.9 1060 aluminum SCH 40 cap

    • Brand: HANMAC Aluminum alloy steel seamless cap

    • Packaging: Plywood cases or pallets or as customer's requirement.

    • Supply Ability: 60000 ton/year

    • Min. Order: 1 Piece/Pieces

    Note on the use aluminum cap Measure the outer circumference of the aluminum 1060 cap and mark it on the barrel and the head Then beginning to weld aluminum SCH 40 cap After welding ANSI B16 9 SCH 40 cap and the barrel it is necessary to timely clean the weld and the surrounding welding slag contaminants and then...

    Contact Now

  • ANSI B16.9 1060 aluminum alloy cap

    ANSI B16.9 1060 aluminum alloy cap

    • Brand: HANMAC ANSI B16.9 1060 aluminum alloy cap

    • Packaging: Plywood cases or pallets or as customer's requirement.

    • Supply Ability: 60000 ton/year

    • Min. Order: 1 Piece/Pieces

    The characteristics of the use of the ANSI B16 9 1060 aluminum alloy cap 1 The mechanical properties of the ANSI B16 9 1060 aluminum alloy cap is very good better than the dish shaped head Since the depth of the 1060 alloy cap is different from that of other types of heads there is a high requirement for the abrasive...

    Contact Now

  • Alloy steel aluminum flange

    Alloy steel aluminum flange

    • Brand: HANMAC alloy steel aluminum flange

    • Packaging: Plywood cases or pallets or as customer's requirement.

    • Supply Ability: 60000 ton/year

    • Min. Order: 1 Piece/Pieces

    Aluminum alloy flanges introduction Aluminum alloy flanges are made from aluminum alloys that have been machined and forged Due to the different alloying elements added to the aluminum alloy alloy steel aluminum flange is divided into aluminum silicon alloy aluminum alloy flange aluminum copper based aluminum alloy...

    Contact Now

  • 1 1/2 inch 90 degree aluminum elbow fitting

    1 1/2 inch 90 degree aluminum elbow fitting

    • Brand: HANMAC

    • Packaging: Plywood cases or pallets or as customer's require

    • Supply Ability: 500 ton/month

    • Min. Order: 1 Piece/Pieces

    Aluminum elbows installation precautions First keeping the 1 1 2 inch aluminum 1060 elbow dry and ventilated same to the holder Store the aluminum butt weld elbow in the correct way Before installation you must carefully check the individual standards of the aluminum std elbow whether the diameter meets the...

    Contact Now

  • 1060 alloy aluminum steel tee

    1060 alloy aluminum steel tee

    • Brand: HANMAC 1060 alloy aluminum steel tee

    • Packaging: Plywood cases or pallets

    • Supply Ability: 60000 ton/year

    • Min. Order: 1 Piece/Pieces

    Aluminum tee can also be called aluminum tee fitting aluminum reducing tee 1060 aluminum tee can be used to either combine or split a fluid Most common are tees with the same inlet and outlet sizes but aluminum reducing tee are available aswell It means the one or two ends are differ in dimension due to thisdimension...

    Contact Now

  • 8 inch steel aluminum pipe caps

    8 inch steel aluminum pipe caps

    • Brand: HANMAC 8 inch steel aluminum pipe caps

    • Packaging: Plywood cases or pallets or as customer's requirement.

    • Supply Ability: 60000 ton/year

    • Min. Order: 1 Piece/Pieces

    The usage of aluminum pipe end 1 Use in a pressurized container There is a straight tube in the middle of the upper and lower sides Aluminum 1060 cap can be used as a pressure vessel 2 If the pipe has reached the top and is not ready to be extended It can be welded to the pipe with the aluminum 6063 cap and used as...

    Contact Now

  • 1 1/2 inch aluminum 90 degree elbow

    1 1/2 inch aluminum 90 degree elbow

    • Brand: HANMAC 1 1/2 inch aluminum 90 degree elbow

    • Packaging: Plywood cases or pallets or as customer's require

    • Supply Ability: 500 ton/month

    • Min. Order: 1 Piece/Pieces

    One of the characteristics of high quality aluminum elbows is the sealing method Aluminum butt weld elbow can seal itself tightly and strengthen the pipeline which greatly strengthens the overall strength of the joint Related product 1060 aluminum tee aluminum 1060 concentirc reducer aluminum 1060 cap Product...

    Contact Now

  • Aluminum gas pipe end cap

    Aluminum gas pipe end cap

    • Brand: HANMAC Aluminum gas pipe end cap

    • Packaging: Plywood cases or pallets or as customer's requirement.

    • Supply Ability: 60000 ton/year

    • Min. Order: 1 Piece/Pieces

    Butt weld aluminum cap is one of our best selling products Now we can offer aluminum 1060 cap aluminum 6063 cap aluminum ANSI B16 9 cap aluminum seamless cap and ect Besides we could also manufacture the aluminum pipe end cap according to your cap drawing If you require pipe end cap please kindly send to me Aluminum...

    Contact Now

  • 4 inch aluminum weld on cap

    4 inch aluminum weld on cap

    • Brand: HANMAC 4 inch aluminum weld on cap

    • Packaging: Plywood cases or pallets or as customer's requirement.

    • Supply Ability: 60000 ton/year

    • Min. Order: 1 Piece/Pieces

    Aluminum cap are used for connection pipes of different diameters and find wide applications in various chemicals construction industrieds paper cement ship builders The aluminum pipe end cap which is supply by HANMAC in diverse materials The aluminum 1060 cap is often used in the end of piping system It provides...

    Contact Now

  • Aluminum DIN 2617 pipe end cap

    Aluminum DIN 2617 pipe end cap

    • Brand: HANMAC Aluminum DIN 2617 pipe end cap

    • Packaging: Plywood cases or pallets or as customer's requirement.

    • Supply Ability: 60000 ton/year

    • Min. Order: 1 Piece/Pieces

    DIN 2617 aluminum cap is the German Standard for aluminum pipe fitting HANMAC supply DIN 2617 aluminum 1060 cap in both large and small quantity worldwide and offer you the best price in the market Aluminum DIN 2617 pipe end cap introduction Product Name Aluminum DIN 2617 pipe end cap Size 1 2 48 Thickness SCH10...

    Contact Now

  • 4 inch aluminum pipe cap

    4 inch aluminum pipe cap

    • Brand: HANMAC 4 inch aluminum pipe cap

    • Packaging: Plywood cases or pallets or as customer's requirement.

    • Supply Ability: 60000 ton/year

    • Min. Order: 1 Piece/Pieces

    HANMAC are manufacturer exporter and supplier of aluminum cap These aluminum pipe end cap are widely well know for he utmost output and outstanding results that it gives 4 inch aluminum pipe cap introduction Product Name 4 inch aluminum pipe cap Size 1 2 48 Thickness SCH10 SCH160 Material 1050 1060 3003 5052 5083 6061...

    Contact Now

  • Aluminum 90 degree pipe elbow fittings

    Aluminum 90 degree pipe elbow fittings

    • Brand: HANMAC Aluminum 90 degree pipe elbow fittings

    • Packaging: Plywood cases or pallets or as customer's require

    • Supply Ability: 500 ton/month

    • Min. Order: 1 Piece/Pieces

    The way in which the aluminum elbows are connected is direct welding the most common way aluminum flange connection hot melt connection electrofusion connection screw connection and socket connection Storage and maintenance methods for aluminum butt weld elbow 1 The aluminum 1060 elbow that is continuously stored...

    Contact Now

  • Aluminum pipe cap head

    Aluminum pipe cap head

    • Brand: HANMAC Aluminum pipe cap head

    • Packaging: Plywood cases or pallets or as customer's requirement.

    • Supply Ability: 60000 ton/year

    • Min. Order: 1 Piece/Pieces

    Good delivery time for aluminum cap Generally the aluminum pipe end cap need about 5 10 days if the aluminum 1060 cap are instock But if the aluminum 6063 cap not in stock it will be need about 25 35 days All of them are depend on the order s quantity Aluminum pipe cap head introduction Product Name Aluminum pipe cap...

    Contact Now

  • Aluminum tube end cap accessories

    Aluminum tube end cap accessories

    • Brand: HANMAC Aluminum tube end cap accessories

    • Packaging: Plywood cases or pallets or as customer's requirement.

    • Supply Ability: 60000 ton/year

    • Min. Order: 1 Piece/Pieces

    After sale choose for aluminum pipe fitting When the customer received the aluminum cap we are very glad that customer give us some suggestion about the aluminum 1060 cap such as the price the usage and ect If you have any problem for the aluminum pipe end cap in these time please contact with us freely by email or...

    Contact Now

  • 1 inch aluminum gas cap heads

    1 inch aluminum gas cap heads

    • Brand: HANMAC 1 inch aluminum gas cap heads

    • Packaging: Plywood cases or pallets or as customer's requirement.

    • Supply Ability: 60000 ton/year

    • Min. Order: 1 Piece/Pieces

    The terms of payment for aluminum pipe end cap The payment of aluminum 1060 cap always be 30 T T in advance balance before shippment 100 L C but if you have other requirement about the aluminum cap we could also communicated and accepted it 1 inch aluminum gas cap heads details Product 1 inch aluminum gas cap heads...

    Contact Now

Review

Anson Liu

Nov 27, 2019 5

The packing is good, the logistics is very fast, I am very satisfied with the Aluminum 1060 Cap .
Giovanni Ragnoli

Nov 18, 2019 5

Highly recommend this Aluminum 1060 Cap . Thank you! A++++
David Weigand

Nov 15, 2019 5

Aluminum 1060 Cap is good, excellent quality! Recommend!
In order to best meet client's needs, all of our operations are strictly per for Aluminum 1060 Cap , Aluminum 6063 Cap , Aluminum 1060 , We sincerely look forward to hearing from you. Give us a chance to show you our professionalism and passion. We are sincerely welcome good friends from numerous circles at dwelling and abroad come to cooperate!
"Our solutions are widely recognized and trusted by consumers and will meet up with constantly developing financial and social requires for Aluminum 1060 Cap , Aluminum 6063 Cap , Aluminum 1060 , We supply OEM services and replacement parts to meet the varying needs of our customers. We supply competitive price for quality goods and we are going to make certain your shipment is handled quickly by our logistics department. We sincerely hope to have the opportunity to meet with you and see how we can help you further your own business.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Send Inquiry

Leon

Mr. Leon

Email:

leon@chinahanmac.com

Send Inquiry

Tel:86-317-5692988

Fax:86-317-3200656

Mobile Phone:

Email:leon@chinahanmac.com

Address:BUILDING NO.1 GULOU XINHUA DISTRICT, Cangzhou, Hebei

Mobile Site

http://www.chinahanmac.com